Installation Removing packaging reinforcement | Beko WDA 8514 H

Installation

3.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

DANGER

¾¾The product is heavy. Remove the packaging reinforcement as illustrated.

¾¾Pay attention not to squeeze your hand under the machine during this procedure.

3.3 Removing the transportation locks

CAUTION

A¾¾ Do not remove the transportation locks before taking out the packaging reinforcement. ¾¾ Remove the transportation safety bolts before operating the washing machine!

Otherwise, the product will be damaged.

1

2

3

1Loosen all bolts with the tool supplied in the User Manual bag until they turn freely. (C)

2Remove transportation safety bolts by turning them gently.

3Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)

NOTE

C ¾¾ Keep the transportation safety bolts in a safe place to reuse when the machine needs to be moved again in the future.

¾¾ Never move the product without the transportation safety bolts properly fixed in place!

User’s Manual

15 / EN

Image 15

Beko WDA 8514 H user manual Installation Removing packaging reinforcement, Removing the transportation locks

Contents

Washer-Dryer ¾¾Warning for electric shock Please read this manual first Preparation Important instructions for safety and environmentInstallation Your washer-dryer Operating the product Troubleshooting Maintenance and cleaning General safety Electrical safetyRisk of electric shock Water will occur Important instructions for safety and environment Important instructions for safety and environment Intended use Childrens safety 10 / EN Package information 11 / EN Overview Your washer-dryer Package Contents Product Your washer-dryer Technical specifications Appropriate installation location Installation Removing the transportation locks Installation Removing packaging reinforcement Installation Flush usage with the bench Wall when it is installed under the bench or in a cupboard16 / EN Installation Connecting water supply Pressure is higher17 / EN Tightly so that it cannot come out 90 cm Installation Connecting to the drain 19 / EN Installation Adjusting the feet Installation Electrical connection Transportation of the product20 / EN Sorting the laundry Always obey the instructions given on the garment tags21 / EN Things to be done for energy saving Preparation Preparing laundry for washing Production. It is not harmful for the product Preparation First useCorrect load capacity Use an anti-limescale suitable for the washing machines Preparation Loading the laundry Using detergent and softener 25 / EN Preparation 26 / EN Using limescale removerDrum in future washings Do not use bleaching agent and detergent by mixing them 27 / EN Preparation Tips for efficient washing 28 / EN Preparation Tips for efficient drying 29 / EN Control panel Operating the product Display symbols Preparing the machineWash Programme selection Operating the product Washing Programmes Operating the product Cottons Eco32 / EN Synthetics Woollens33 / EN 34 / EN Xpress Super Short Shirts35 / EN Temperature selection Selecting the spin speed36 / EN 37 / EN Adjustable appears on the display 38 / EN ¾¾ For dry weights of laundry, see , StepOperating the product Drying Programmes Synthetic Dry 39 / EN Operating the product Washing and Drying ProgrammesKg Wash+Dry Drying clothes 40 / EN Anti Allergy Wash+Dry Operating the product Programme and consumption table For washing41 / EN 42 / EN Programme and consumption table For drying 43 / EN Operating the product Auxiliary function selection 44 / EN Drying StepsExtra Rinse Anti-Crease 45 / EN Time display 46 / EN Operating the product End Time Operating the product Starting the Programme Loading door lockChanging the selections after Programme has started To activate the Child Lock Child Lock¾¾ The selected Programme starts anew Has stopped On the display Cancelling the ProgrammeEntering the Settings menu End of Programme T T I N G S Memory Programme setting Your machine is equipped with a Standby Mode51 / EN Cleaning the detergent drawer Maintenance and cleaning ¾¾ Repeat Drum Cleaning process in every 2 months ¾¾ Use an anti-limescale suitable for the washing machines53 / EN Cleaning the body and control panel Maintenance and cleaning Cleaning the air suction filter Region of installation Maintenance and cleaning Cleaning the water intake filtersDraining remaining water and cleaning the pump filter May cause noise problem Turn the pump filter to take it out 56 / EN Maintenance and cleaning 57 / EN Troubleshooting 58 / EN Troubleshooting Laundry became stiff after washing 59 / EN 60 / EN Water pressure is low. Check the water pressure 61 / EN Page