Beko WDA 8514 H Memory Programme setting, Your machine is equipped with a Standby Mode, 51 / EN

Operating the product

S E T

3.If you want to turn up the volume, press the light button on the lower right corner of the display when "VOLUME ON" is selected. Light goes off and “Set” appears on the display.

4.If you want to turn down the volume, press the light button on the lower right corner of the display when "VOLUME OFF" is selected. Light goes off and “Off” appears on the display.

5.22 Memory Programme setting

You can create a Memory Programme by saving frequently used Programme and other settings. Use this function when you want to select quickly the same settings you use for the laundry that you wash regularly.

Memory Programme will remain at the factory set Programme until you make a new favourite Programme setting.

5.22.1To store a new Memory Programme:

1.Select the desired Programme, temperature, spin speed, soiling degree and auxiliary function.

2.Keep the Memory button pressed for 3 seconds.

3.Countdown as "Storing favourite 3-2-1" appears on the display.

C NOTE

¾¾ If storing is not successful, “Memory not saved” appears on the display.

5.22.2To select a Memory Programme:

1.Press Memory button. “Memory selected” appears on the display.

2.Programme and other settings saved as favourite appear on the display.

3.Press Start / Pause button to start your Memory Programme.

5.23 Your machine is equipped with a "Standby Mode"

In case of not starting any Programme or waiting without making any other operation when the machine is turned on by On/Off button and while it is in selection step or if no other operation is performed approximately 2 minutes after the Programme you selected has come to an end, your machine will automatically switch to energy saving mode. Brightness of indicator lights will decrease. Also, if your product is equipped with a display showing the Programme duration, this display will completely turn off. In case of rotating the Programme Selection knob or pressing any button, lights and display will restore to their previous condition. Your selections made while exiting the energy saving mode may change. Check the appropriateness of your selections before starting the Programme. Readjust if necessary. This is not a fault.

User’s Manual 51 / EN