Installation
3.8 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•If the current fuse or circuit breaker is less than 16 Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker.
•The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
B DANGER
¾¾Damaged power cables must be replaced by the Authorized Service Agents.
3.9 Transportation of the product
1Unplug the product before transporting it.
2Remove water drain and water supply connections.
3Drain all water that has remained in the product. See. 6.6
4Install transportation safety bolts in the reverse order of removal procedure; see 3.3.
DANGER |
¾¾The weight of your product is not suitable to be carried by one person. |
¾¾The product is heavy; it should be carried by two persons very carefully |
on the stairs. Falling of your product on you may cause disabilities. |
A CAUTION
¾¾ Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
C NOTE
¾¾ Never move the product without the transportation safety bolts properly fixed in place!
20 / EN | |
|
|
