Maintenance and cleaning
6.6.1In order to clean the dirty filter and discharge the water:
1.Unplug the machine to cut off the supply power.
CAUTION
A¾¾ Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, cleaned the filter after the water in the machine cools down.
2Open the filter cap.
Press the tab on the filter cap downwards and pull the piece out towards yourself.
6.6.2 To discharge the water:
aPull the emergency draining hose out from its seat
bPlace a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose. When the container is full, block the inlet of the hose by replacing the plug. After the container is emptied, repeat the above procedure to drain the water in the machine completely.
cWhen draining of water is finished, close the end by the plug again and fix the hose in its place.
dTurn the pump filter to take it out.
56 / EN | |
|
|
