Power Mac G4 (Mirrored Drive Doors)
SCSI Cable
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty.
Note: Written and video instructions covering
Warning: During this procedure, keep small parts away from children.
Tools Required
The only tool required for this procedure is a Phillips screwdriver.
Opening the Computer
Warning: Always shut down your computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down before continuing.
1.Place your computer on a clean, flat surface.
2.If you think your computer is in sleep, press the power button on the front of the computer to wake it.
3.Shut down your computer and wait five minutes before continuing.
4.If you attached a security cable through the computer’s lockable cover latch, remove the cable.
5.Unplug all other cables from the computer except the power cord.
