TroubleshootingSymptom Charts/Peripherals - 20
Peripherals
After you connect | 1 | Switch on external SCSI device before starting computer. |
external SCSI device, | 2 | Check cable connections. |
computer does not | 3 | Verify that SCSI chain is terminated correctly. |
boot | 4 | Verify that SCSI select switch setting on external device is |
| 5 | unique. |
| Verify operation of internal hard drive. | |
| 6 | Try |
| 7 | Replace logic board. |
Note: When replacing the logic board, check that the serial port EMI clip is attached to the bottom of the CPU stiffener. If it is missing, replace the stiffener. On international units, also replace the stiffener if the modem EMI clip is missing. The “CPU Stiffener” topic in Take Apart helps you locate and identify the two EMI clips.
