![](/images/new-backgrounds/1184652/184652101x1.webp)
|
| Troubleshooting |
| Symptom Charts/Peripherals - 26 | |
|
| 1 | Verify that System is 7.5.2 or later. |
| |
Known | |||||
printer does not print | 2 | Verify that the Chooser and Control Panel settings are | |||
|
|
| 3 | correct. | |
|
|
| Check that Filesharing is turned on and Network Control is | ||
|
|
| 4 | not set on Apple Remote Access (ARA). | |
|
|
| Check cables. | ||
|
|
| 5 | Replace printer cable. | |
|
|
| 6 | Try | |
|
|
| 7 | network. | |
|
|
| Replace logic board. |
Note: When replacing the logic board, check that the serial port EMI clip is attached to the bottom of the CPU stiffener. If it is missing, replace the stiffener. On international units, also replace the stiffener if the modem EMI clip is missing. The “CPU Stiffener” topic in Take Apart helps you locate and identify the two EMI clips.