| Take Apart | Speaker - 94 | |
| Mounting | Replacement Note: Make |
|
| sure you route the cable | ||
| Screws | above the clutch, inside the | |
| Round Hole | EMI shield. | |
| Retaining Bar | 4 Using a #00 Phillips | |
| screwdriver, remove | ||
|
| the two speaker | |
|
| mounting screws and lift | |
Oblong | off the speaker retaining | ||
bar. | |||
Hole |
|
| |
| Speaker | Replacement Note: | |
| Replace the retaining bar as | ||
|
| shown. Install the screw in | |
|
| the round hole first, then | |
|
| the screw in the oblong hole. | |
|
| 5 Lift out the speaker. | |
