Connecting to an Ethernet network
The
You can connect your server directly to an Ethernet network using a
mApple Ethernet Thin Coax Transceiver
mApple Ethernet AUI Adapter
See your
WARNING Do not connect cables to the back of the server when the power is on or you may damage your system.
You can connect an adapter and cable for an Ethernet network directly to the server without installing an expansion card. You can find the Ethernet ports on the back of your server by looking for the Ethernet icon:
Ethernet icon
AAUI Ethernet port
Although you can connect cables to both of these Ethernet ports at the same time, you can use only one of these
The following sections provide basic instructions for connecting your server to an Ethernet network.
20Chapter 2 / Connecting to the Network