Apple Front Panel Board Cable Installing the Replacement Cable, Remove cable from enclosure

Models: Front Panel Board Cable

1 14

Page 11

Replacement

Cable

073-1257 Rev. A 11

Image 11

Contents

Front Panel Board Cable First StepsOpening the Computer Replacement InstructionsRemoving the Installed Cable Required ToolsHard Drive 073-1257 Rev. A Graphics Card3 Locate graphics card in slot 5 Remove bracket from enclosure7 Move fan to left, which releases retention bar 6 Press button on PCIe fanChecklist for handling card 073-1257 Rev. A Processor Tray10 Locate processor tray 14 Locate PCIe fan PCIe Fan13 Place tray DIMM side up on soft, clean cloth 12 Holding tray by latches, lift it out of computer073-1257 Rev. A Processor Cage15 Remove 2 screws 16 Slide fan up and out of computer 17 Locate processor cage19 Using long-handled Phillips #1 screwdriver, loosen 6 captive screws 073-1257 Rev. A Front Panel Board Cable24 Lift cage out of enclosure 27 Remove cable from enclosure Installing the Replacement Cable1 Connect replacement cable to front panel board and backplane board 26 Disconnect cable from front panel board and backplane board2 Position cage in enclosure Processor CagePCIe Fan Slide PCIe fan to the right to lock card in place 12 Reinstall graphics card in slotProcessor Tray Graphics Card16 Replace hard drive in far-left drive bay Closing the Computer1 Replace access panel Hard Drive