Apple Front Panel Board Cable Processor Cage, Remove 2 screws 16 Slide fan up and out of computer

Models: Front Panel Board Cable

1 14

Page 8

16 Slide fan up and out of computer.

073-1257 Rev. A 8

Image 8

Contents

First Steps Opening the ComputerReplacement Instructions Front Panel Board CableRemoving the Installed Cable Required ToolsHard Drive Graphics Card 3 Locate graphics card in slot5 Remove bracket from enclosure 073-1257 Rev. A 6 Press button on PCIe fan 7 Move fan to left, which releases retention barChecklist for handling card 073-1257 Rev. A Processor Tray10 Locate processor tray PCIe Fan 13 Place tray DIMM side up on soft, clean cloth12 Holding tray by latches, lift it out of computer 14 Locate PCIe fanProcessor Cage 15 Remove 2 screws 16 Slide fan up and out of computer17 Locate processor cage 073-1257 Rev. A 19 Using long-handled Phillips #1 screwdriver, loosen 6 captive screws 073-1257 Rev. A Front Panel Board Cable24 Lift cage out of enclosure Installing the Replacement Cable 1 Connect replacement cable to front panel board and backplane board26 Disconnect cable from front panel board and backplane board 27 Remove cable from enclosure2 Position cage in enclosure Processor CagePCIe Fan 12 Reinstall graphics card in slot Processor TrayGraphics Card Slide PCIe fan to the right to lock card in placeClosing the Computer 1 Replace access panelHard Drive 16 Replace hard drive in far-left drive bay