Using the AV Playback Function
7

Using Coaxial Output Digital Audio

To output the digital audio signal, connect this connector to an AV amplifier (receiver)
which equips a digital audio decoder. You will also get multi-channel sound effect if the
audio source carries it.
Power Connection
1. Connect the DC jack of the AC adapter to the connector marked “DC IN”, plug the other
end into an electrical outlet.
2. Press the Power switch and then the blue LED will light up with low luminance, entering a
mode called “Standby mode.” You can press (STANDBY) button on the remote to
activate the unit for playback. Pressing the (STANDBY) button again will switch to the
standby mode.
Standby:
LED lights up with low
luminance
Activated:
LED lights up with high
luminance