Appendix
40
Troubleshooting
Problem Possible Cause Solution
TV screen does not
display normally
◎Video setting is not correct. ◎Press and hold then press
MENU until screen displays correctly.
◎Reboot the TV set and connect the
composite cable instead of the
component cable
No power
(All LEDs are off)
The ◎power plug is not properly
connected.
◎The unit has not been turned on.
Check the power connection and ◎
plug it again.
◎Press Power switch to turn it on.
Can’t operate with
the remote control
◎If this unit can’t be activated by
pressing button of remote
control, it is probably because
the power is off.
Remote is not point◎ing toward
the remote receiver.
The tab of battery ◎has not been
removed.
◎Battery is not assembled properly.
Battery ◎became depleted.
◎Refer to “No power” section for its
solution.
Point the ◎remote toward the
receiver when in operation.
Pull out the tab of the battery on ◎
the side of remote control.
◎Check the battery direction.
◎Replace the battery.
Some folders are not
listed in “Detail
View”
◎These folders may be “Hidden”,
“Encrypted”, “Compressed” or
“System Folder”.
◎Change the attribute of these
folders, or create another folder.
Some files can’t be
played back
◎These files are compressed by
Windows.
◎
T
he formats of these files are not
supported.
◎These files are damaged.
◎Uncompress them.
◎Convert these files to some
supported format.
◎Replace them with undamaged
ones.
The SETUP MENU
appears to be in an
unrecognizable
language.
Incorrect ◎ OSD LANGUAGE
setting.
Check the◎ OSD LANGUAGE
setting in SETUP MENU .
No image Video ◎cable is not connected.
Incorrect◎ video setting.
Check video connection◎.
◎Press and hold and then press
MENU repeatedly until the screen
displays correctly.