Motorola i1000plus specifications Troubleshooting, Question Answer Pressed

Troubleshooting

Question	Answer
I pressed the	Be sure to press and hold the power button until the
	display appears and you hear an audible alert. If nothing
power button, but
	happens, check that you have installed a battery and
nothing happened.
	that the battery is charged. For more information about
What’s wrong with
	batteries and charging, see “Installing and Removing a
my phone?
	Battery” on page 13.
	Your battery’s “talk-time” and “standby-time” are
	relative measurements of battery capacity. The more
	you talk on the phone, the less standby-time you have,
	and vice versa.
	To get the most from your battery, allow it to charge
	fully. To charge the battery to 100% of its capacity,
	leave it in the charger for an extra hour after the
	charger’s light turns green.
	You can also turn on the Power Save Mode feature to
My battery didn’t	extend battery life. However, the LED Power/Status
	Indicator does not light when this feature is activated.
last as long as I
	Certain features require more power and reduce battery
expected. What
	life. If you have selected the Automatic Display of
can I do to extend
	Individual Call Timer feature, the display uses power to
battery life?
	remain active during each call. Turn this feature off to
	conserve battery energy. (See “Displaying the Individual
	Call Timer Automatically” on page 46 for more
	information.)
	Use only batteries that are compatible with your phone.
	Exposing your battery to extreme temperatures—below
	-10°C (14°F) or above 45°C (113°F)—can shorten
	battery life. Batteries are especially sensitive to high
	temperature extremes. As a good rule, always take your
	phone with you when you leave your car.
The display shows	Enter the last three digits of your cellular number. If that
	doesn’t work, use the factory preset lock code: 123. If
“Locked.” How do
	nothing works, call your service provider (the company
I unlock my
	that sends your monthly cellular bill). (See “Locking/
phone?
	Unlocking Your Phone” on page 54.)
	The cellular system did not process your call. For
I tried to place a	example, the cellular system may be overloaded with
call and received a	call attempts. To redial, press Sbefore ending your
fast busy signal.	call attempt, or press eand try the call again later.
	(See “Redialing a Number” on page 21.)

80