What if you upgrade your Macintosh system software?
If you decide to replace or upgrade your Macintosh system software after
you’ve installed the QuickTake software, you may not be able to connect to the
camera. To fix this problem, follow these steps:
1 Insert
QuickTake Disk 1
into a floppy disk drive.
If necessary, open the disk icon.
2 Double-click the Installer icon to open it.
3 In the Welcome dialog box that appears, click OK.
4 In the Installer dialog box, click Customize.
5 Choose QuickTake Software from the list.
6 Click Install.
7 When you see a message reporting that the installation was successful, click Restart.
You have reinstalled the QuickTake software, and you can connect to your
QuickTake camera again.
What’s next?Now you’re ready to begin capturing images. Read Chapter 2 for instructions
on how to capture images with your QuickTake camera.
8Chapter 1