Naming the camera
It is a good idea to name your camera if more than one QuickTake camera
will be used with your Macintosh. The camera’s name is associated with the
names of the images it has captured to help you identify them.
The camera must be connected to your Macintosh. (For instructions, see
“Connecting the Camera to Your Macintosh,” earlier in this chapter.)
1 If necessary, turn on the camera by sliding open the lens cover.
2 On your Macintosh, open the QuickTake Image Access control panel.
3 In the box that appears, click Connect to Camera.
4 Type the name you want inside the Camera Name field.
5 Click Set Name.
30 Chapter 3
Enter the camera name in this box...
...then click here.