IMPORTANT
When Camera Watcher is finished copying all of the images to
the hard disk, it erases all the images in your camera.
The computer beeps to indicate that all images have been transferred to your
Macintosh and erased from the camera.
To stop Camera Watcher, choose PhotoFlash Camera Watcher from the
Application menu to make it the active program, then choose Quit from the
File menu.
Capturing images from the Macintosh
You can use your Macintosh to capture images with your QuickTake camera.
1 Connect the camera to your Macintosh.
For instructions, see “Connecting the Camera to Your Macintosh,” earlier in
this chapter.
Note: To conserve battery power, it is recommended that you use either the
QuickTake AC Adapter or Battery Booster Pack whenever you connect your
camera to your computer.
2 Arrange the camera so it’s in a position to capture the image you want.
3 Double-click the PhotoFlash icon to open it.
4 Turn on the camera by sliding the lens cover open.
5 Choose QuickTake Scripts from the Script menu, then choose Camera Controls.
If you do not need to make any changes to the camera settings before you
capture your image, you can capture the image right away by choosing either
Take High-Quality Image (to capture a high-quality image) or Take Standard-
Quality Image (to capture a standard-quality image) instead.
35
Using the Camera With Your Macintosh