Paper Jams
Chapter 5: Troubleshooting ❖5-17
BIf the paper is jammed in the Fuser area, remove it
carefully without touching the Fuser. If it becomes
difficult to pull out the paper, locate the green knob—
at the same time, press it in and turn it until the paper
is adequately out and easy to pull.
Never touch the heater area (where a label
indicating high temperature is located).
CIf the paper jammed in Area A is below the Fuser,
remove it by gently pulling it away from the printer.
4Close Door A, then close the Duplex Module.
If the Control Panel message indicates an Area B
jam, see “Clearing Area B” (page5-18).