Using the Finisher
3-36 ❖User Guide
Bin Level Sensors
Finisher sensors can detect the following bin conditions:
•Empty
•50%
•Full
When a bin is full and the stack height does not allow
additional sets to be sent to it, the destination of
additional sets directed to the full bin is determined by
the Output Timeout system parameter in the printer’s
System Menu.
Safety Limitation
When Finisher Bin 3 is selected, the bins are raised to the
highest position. In the interest of safety, they will only
remain in this position for one minute following the last
page delivered to Bin 3. After one minute, the bins are
lowered to align Bin 2 with the output paper path.
Unload Button
The Unload Button temporarily interrupts printing and
places the finisher in the home position to allow the
operator to remove output. It also signals the controller to
sense stack height in the bins and resume printing after
the stack has been removed. Figure1.4 on page 1-17
illustrates the position of the unload button.