Apple Processor Cage and Clips warranty Installing Replacement Clips, Lift cage out of enclosure

Models: Processor Cage and Clips

1 15

Page 10

1If you are replacing just the processor cage clips, and not the cage, locate clips on bottom of cage.

Remove clips from cage.

6Go to “Installing the Processor Cage.”

073-1253 Rev. A 10

Image 10

Contents

Replacement Instructions First StepsOpening the Computer Processor Cage and ClipsRequired Tools Removing the Installed Cage and ClipsHard Drive 5 Remove bracket from enclosure Graphics Card3 Locate graphics card in slot 073-1253 Rev. A 6 Press button on PCIe fan 7 Move fan to left, which releases retention barChecklist for handling card 10 Locate processor tray Processor Tray073-1253 Rev. A 12 Holding tray by latches, lift it out of computer PCIe Fan13 Place tray DIMM side up on soft, clean cloth 14 Locate PCIe fan17 Locate processor cage Processor Cage and Clips15 Remove 2 screws 16 Slide fan up and out of computer 073-1253 Rev. A 19 Using long-handled Phillips #1 screwdriver, loosen 6 captive screws 24 Lift cage out of enclosure Installing Replacement ClipsInstall replacement clips on bottom of cage Release fan cables from clips Remove clips from cage2 Release fan cables from clips on bottom of processor cage Transferring Cage Fans1 Locate processor cage fans 073-1253 Rev. A Installing the Processor Cage Processor Tray 7 Press down until fan clicks into place in connectorPCIe Fan 8 Replace 2 screwsHard Drive 11 Reinstall graphics card in slotGraphics Card Slide PCIe fan to the right to lock card in placeClosing the Computer 1 Replace access panel