Apple Processor Cage and Clips warranty Transferring Cage Fans, Locate processor cage fans

Models: Processor Cage and Clips

1 15

Page 11

If you are replacing the processor cage with a new cage, you must transfer the front and rear cage fans to the new cage.

073-1253 Rev. A 11

Image 11

Contents

Processor Cage and Clips First StepsOpening the Computer Replacement InstructionsHard Drive Removing the Installed Cage and ClipsRequired Tools 073-1253 Rev. A Graphics Card3 Locate graphics card in slot 5 Remove bracket from enclosure7 Move fan to left, which releases retention bar 6 Press button on PCIe fanChecklist for handling card 073-1253 Rev. A Processor Tray10 Locate processor tray 14 Locate PCIe fan PCIe Fan13 Place tray DIMM side up on soft, clean cloth 12 Holding tray by latches, lift it out of computer073-1253 Rev. A Processor Cage and Clips15 Remove 2 screws 16 Slide fan up and out of computer 17 Locate processor cage19 Using long-handled Phillips #1 screwdriver, loosen 6 captive screws Release fan cables from clips Remove clips from cage Installing Replacement ClipsInstall replacement clips on bottom of cage 24 Lift cage out of enclosure073-1253 Rev. A Transferring Cage Fans1 Locate processor cage fans 2 Release fan cables from clips on bottom of processor cageInstalling the Processor Cage 8 Replace 2 screws 7 Press down until fan clicks into place in connectorPCIe Fan Processor TraySlide PCIe fan to the right to lock card in place 11 Reinstall graphics card in slotGraphics Card Hard Drive1 Replace access panel Closing the Computer