Troubleshooting the USB Installation
None of the LEDs is on when I power on the LAN Cable Modem.
Check the connection between the power adapter and the cable modem. Power off the cable modem and wait for 5 seconds, and power on the modem again. If the problem still exists, you may have a hardware problem.
When attempting to install the USB driver in Windows 98 SE, I receive the following error message: Device not installed at this time. Driver not found.
This usually occurs when the wrong driver has been installed. To remove the wrong driver and install the correct driver:
1.
2.Click the Device Manager tab
3.Click the plus sign next to Universal Serial Bus controllers to view the list of installed USB device drivers.
User’s Guide | 22 |
