![](/images/new-backgrounds/1215303/21530335x1.webp)
(8)Press the REC button 6 for 3 seconds during the scheduled recording to stop it any time. If you wish to continue the scheduled
recording, press the REC button 6 to proceed.
Note: You can proceed to start the scheduled recording from the current time if it is in the scheduled interlude as soon as setting is completed, and come out from the menu to start recording.
Note: If you activate the recording function before the scheduled recording, the unit will operate recording as shown in the diagram below and keep those Images in different files.
|
| START | END |
| START | END | ||||||
03:00 |
|
|
|
|
|
|
|
|
|
|
| |
06:00 | 08:00 |
| 12:00 | 14:00 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Start Manual |
| Timer |
|
|
| Manual |
| Timer |
|
| Manual | |
|
|
|
|
|
|
| ||||||
Recording |
|
|
|
|
|
|
|
|
|
|
|
3.2.3 Alarm / Motion Recording
MAIN MENU
RECORD
ALARM / MOTION
TIMER/ SEQ/ TITLE
COMMUNICATION
DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
ALARM / MOTION
ALM OPERATION | : OFF |
AUDIO | : OFF |
ALM TYPE | : NO |
ALM DURATION | : 30 SEC |
PRE- ALARM | : OFF |
MOTION SETTING |
|
MAIN PAGE |
|
ALARM REC ENABLE
(5)To active the motion alarm recording, select MOTION SETTING and press the Enter button 15 to enter the MOTION SETTING page, set MOTION ENABLE TO ON, and set a suitable SENSITIVITY and REGION according to the video sources.
Take the following steps to activate the programmed alarm recording. For the ALM OPERATION, AUDIO, ALM TYPE, ALM DURATION, and
(1) | Press the Setup button to enter the |
| MAIN MENU. |
(2) | Select ALARM / MOTION and press the |
MAIN MENU
RECORD ALARM / MOTION TIMER/ SEQ/ TITLE COMMUNICATION DISK
SYSTEM
GOTO ALARM/ MOTION PAGE
ALARM / MOTION
ALM OPERATION | : OFF |
AUDIO | : OFF |
ALM TYPE | : NO |
ALM DURATION | : 30 SEC |
PRE- ALARM | : OFF |
MOTION SETTING |
|
MAIN PAGE |
|
SET MOTION DETECTION
| Enter button | to enter the ALARM / |
| MOTION. |
|
(3) | Set the desired ALM TYPE, and ALM | |
| DURATION for | use. If the audio |
| capability is required, set AUDIO to ON. | |
| If | |
| ||
(4) To activate/deactivate the alarm recording, | ||
| set ALM OPERATION to ON/ OFF. |
16
MOTION SETTING
CH1 | : ON |
CH2 | : OFF |
CH3 | : OFF |
CH4 | : OFF |
SENSITIVITY | : 3 |
MAIN PAGE