1.Use 88904 (screw), 89056 (washer), and 88921 (nut) to mount bracket. Place bracket (70402017) around shelving pole on the inner side of the shelving unit. Screw bracket (70402018) to bracket (70402017) around shelving pole on the outer side of the shelving unit. The bracket will allow the remote box inner side to align with the front side of the food warmer
Bracket 70402018
Tighten, will not be accessible once remote box is on.
Bracket (70402017) always point to the inside of the shelving unit
Do not tighten. May have to adjust height of bracket in order to mount remote.
2.Remove screw and washer from remote box. Align the holes of the remote box with those of bracket 70402017. Screw the remote box to bracket 70402017. Once remote box is mounted to bracket, adjust height of the bracket so that the top of the remote box is even with or underneath the bottom of the side shields on the shelving unit (min. distance 4" between the bottom of heat strip and top of remote box) and tighten screws.
Now, tighten screws.
Bracket 70402017
D.Repeat steps A through C for other food warmers and shelving combination.
E. | Illustration of a complete Food warmer |
| And Metro® Route stand unit |
5
