INSTALLATION & OPERATING INSTRUCTIONS

Therma-FloSeries Pumps

MOUNTING PREPARATION

1.Find a suitable indoors mounting location where the pump is close to the spa bath, as safely as possible, but remains inaccessible to the person in the spa bath.

a.The pump’s suction port (inlet) must be lower than the normal operating bath water level to ensure proper pump priming, but higher than the spa bath suction to ensure correct draining. When emptied, the water must drain back into the spa bath as required by Health Department Regulations.

b.The discharge port (outlet) should be lower than the water level and the plumbing should be horizontal or rise slightly to prevent airlocks. Airlocks will prevent the pump from properly priming.

To Bath’s Jet

To Bath’s Suction

2.This pump is intended for permanent installation only and must not be used in portable service application. The mounting surface must be constructed from durable material and supported securely in a horizontal position.

3.A clearance of at least 7.5 cm (3”) on all sides (top, sides, front, and back) is required for ease of installation and air circulation. Enclosures must be adequately ventilated to promote free flow of air and prevent condensation.

4.Provision for securing the plumbing leading to the pump must be considered to avoid undue stress to the pump’s connections.

5.The pump requires 220-240 Volts A.C., 10 amperes minimum, 50 Hz, single-phase power supply supplied through a Residual Current Device (RCD) with a rated tripping current not exceeding 30 mA.

Above are the minimum requirements required for installing this pump. Additional requirements, standards, and codes, mandated by government agencies on specific areas where the pump will be installed, must be followed.

2

Page 1 Page 3
Page 2
Image 2
Aqua Flo Therma-Flo EHT owner manual Installation & Operating Instructions, Mounting Preparation
Page 1 Page 3

Therma-Flo EHT specifications

Aqua Flo Therma-Flo EHT is an innovative approach to enhancing temperature control in heating systems, designed to optimize energy efficiency while providing superior comfort. The EHT system stands out for its advanced features and cutting-edge technologies that redefine heating solutions for both residential and commercial applications.

One of the primary features of the Aqua Flo Therma-Flo EHT is its unique thermodynamic design, which ensures rapid heat distribution throughout the space. This technology minimizes temperature fluctuations, maintaining a consistent and comfortable environment. The system employs adjustable flow rates, allowing users to easily customize their heating preferences according to specific needs and room sizes.

Energy efficiency is at the forefront of the Therma-Flo EHT's design. The system utilizes a variable speed pump, which intelligently adjusts its operation based on real-time demands. By optimizing energy consumption, users can significantly reduce their heating costs while minimizing their environmental impact. The integration of smart sensors further enhances efficiency by monitoring temperature and automatically adjusting the system's output.

Another notable characteristic of the Aqua Flo Therma-Flo EHT is its compatibility with renewable energy sources. This flexibility allows users to integrate solar thermal systems or heat pumps seamlessly, making it an ideal choice for eco-conscious consumers looking to reduce their carbon footprint. The combination of traditional heating methods with innovative renewable technologies places the EHT at the forefront of sustainable heating solutions.

The Therma-Flo EHT system is also designed with user comfort in mind. Its quiet operation ensures that environments remain tranquil, making it suitable for homes, offices, and other spaces where noise can be a concern. Additionally, the user-friendly interface allows for easy control and monitoring of heating settings, providing a seamless experience for users.

Durability and reliability are paramount in the construction of the Aqua Flo Therma-Flo EHT. The system is built using high-quality materials designed to withstand the rigors of long-term use, ensuring that it remains a dependable choice for heating needs.

In summary, Aqua Flo Therma-Flo EHT combines advanced technology with exceptional features to deliver efficient, comfortable, and sustainable heating solutions. Its innovative design, energy-saving capabilities, and compatibility with renewable sources make it a leading choice for those looking to enhance their heating systems.
Top Page Image Contents