7 Locate the hinge and install it with the rounded loops facing away from the feeder. Use the
5/32” x 15/32” Bolts and 5/32” Washers. Place the bolt head on top and the thread portion toward the bottom on the inside of the hopper. Install the 5/32” Nylon Lock Nuts and tighten securely (Illustration C).
8 Place the lid on top of the hopper unit and align the hinge knuckles on the lid between the knuckles on the metal hinge. When properly
aligned, you can see all the way through the combined holes. Locate the hinge pole and slide horizontally through the holes (Illustration D). Once all the way through, locate the cotter pin and install it in the hole at the end of the hinge pole and bend it to secure it in position. The lid is now installed (Illustration E).
(Illustration C) | (Illustration D) | (Illustration E) |
PAge 5
