Serenity 7
Serenity Air Baths Model # AI7AIR6042 / AI7AIR6042TO (Tub Only)
41 7/8”
59 1/2”
SPECIFICATIONS:
|
|
|
|
|
|
|
|
|
| 41 7/8” |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| Measurements |
|
|
| 23” |
|
|
|
|
|
| 9 3/4” | |||
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
22” |
|
| 18 1/2” | ||||||||||
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a
2 1/4”General Specifications:
Tub Size | 59 1/2” x 41 7/8” x 23” |
| 151 cm x 106 cm x 58 cm |
Bathing Well | 42” long |
| 24 1/2” wide |
| 22” interior depth |
Shipping Weight | 212 lbs. / 96 kg |
Tub Weight Filled | 703 lbs. / 319 kg |
Tub Only Weight | 136 lbs. / 62 kg |
Weight w/Equipment | 122 lbs. / 97 kg |
Gallons to Overflow | 70 gal. / 265 L |
Electrical Specifications:
Blower/Heater | 1 HP; 10.5 AMP; 120V |
Requirement | 15 AMP; 120V, separate circuit |
| required protected w/ Class A GFCI |
This unit is not recommended for shower installations.
Fax-On-Demand
Document # 1144
Standard equipment:
Air Bath System:-65 Air Jets
-1 HP Variable Speed Air Blower with
-600 Watt Air Heating System
-Electronic Control Package with wave and pulse Features
-Automatic Purge and Dry Cycle with Water Sensors
Aquatic Quality Features:-Chromatherapy
-Raised Seat for Air Jet Action on Thighs
-Slip Resistant Floor
-Air Channels Lined with Antimicrobial Coating
-2 Arm Rests
-Extra Deep and Long Bathing Well
-
-2 Color Matched Grab Bars
-Durable, easy to clean, Lucite® Cast Acrylic Surface
-available in 8 Standard
Limited Lifetime Warranty
optional equipment:
•Comfort Pillow - Oval or Rectangle
•Grab Bar
-White, Biscuit, Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•Lift & Turn Waste and Overflow
-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel or Oil Rubbed Bronze
•Cable Drive Waste and Overflow
-Chrome, Polished Brass, Gold, Polished Nickel, Satin Nickel, Oil Rubbed Bronze or
Color Matched (Bone, White and Biscuit only)
•Waterproof Remote Control with infrared sensor and 25’ cord
•Factory Installed Rigid ABS Tile Flange
•Remote Blower Wiring Kit
•Color Matched Acrylic Skirt
•Premium colors
All acrylic colors featured by Aquatic match the industry’s leading fixture manufacturers.
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem- perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4” variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work. | www.aquaticwhirlpools.com 800.555.5324 |
76 | June 2008 |
