ASSEMBLY INSTRUCTIONS | 10 |
Longevity Arbor |
PLEASE READ COMPLETELY BEFORE YOU BEGIN ASSEMBLY
CHECK BOX FOR THESE CONTENTS
1Trellis Caps (16)
2Headers (2)
3Braces (4)
4Lattice Side Panels (2)
HARDWARE
-1” Wood screws (32)
-2” Wood screws (16)
-2 1/2” Wood screws (8)
-Anchoring kit.
-Brass medallion and nails (2)
TOOLS YOU WILL NEED
•Phillips screwdriver (electric driver recommended)
•Small hammer
•Two bags of concrete mix (60#) to anchor the arbor
HANDY TO HAVE
•Tape measure
•Needle nose pliers
PRELIMINARIES
ARBOR PAINTING: | 4 |
If you wish to stain or paint your arbor, we recommend that you do so before assembly, it makes the job easier. Be careful not to cover up guide marks on top of headers
WORK AREA
3
2
1
Select an area close to where the arbor will be finally placed. While the assembled unit is not very heavy, it is awkward to move far and requires two people to do so easily.
The assembly area should be relatively flat and open, at least 8’x6’. A lawn, driveway or wide path will be satis- factory.