Page 3
TURNING THE ARBOR 180 DEGREES TO ATTACH SECOND HEADER
STEP 4
After attaching the first header to the side panels,
Turn the assembly over by lifting the sides and moving backward.
Then, turn and lower the arbor over the second header.
Attach the second header following the same method as the first header.
4
BLOCKING
STEP 5 | Support the arbor with a block or other item to allow clearance for the |
| attachment of the trellis caps. |
Block
ATTACH THE CAPS TO THE HEADERS
STEP 6 | Install the top caps on both side of the medallion using 1” screws in the locating holes. |
| Use the supplied 2” spacer to install the rest of the caps. |
1” screws