Page 2
CONNECTING THE MEDALLIONS TO THE HEADERS
STEP 1
We recommend installing the medallion on the header prior to final assembly. Needle nose pliers can be help- ful in holding the 1/2” nail.
CONNECTING THE BRACES TO THE HEADER
STEP 2
Install all 4 braces on the ends of the headers into the
Important note:
Placing screws into
CONNECTING THE SIDE PANEL TO THE HEADERS
1
2 ” screws
2
STEP 3
Line up the top of the brace and the top of the side panel. Position the side panel against the back of the brace. Connect the side panel to the header using the 2” wood screws.
Connect the brace to the side panel using 2 1/2” wood screws.
Repeat on both ends of the header.
Important note: |
|
| |
When positioning side panel for attachment to header make |
|
| |
sure the staples in side panel lattice face to the outside of |
| 3 | |
arbor. |
| ||
2 1/2” screws | |||
| |||
|
| ||
|
|
|