Technical specifications
|
| A32 | P35 |
Continuous power output |
| ||
Both channels, 8Ω | , | 100W | 100W |
Single channel, 8Ω | , | 150W | 150W |
Both channels, 4Ω | , | 140W | 140W |
Single channel, 4Ω | , at 1kHz | 200W | 200W |
Three channels, 8Ω | , | – | 90W |
Harmonic distortion, 80% power, 8Ω at 1kHz | 0.005% | 0.005% | |
Inputs |
|
|
|
Phono cartridge: |
|
|
|
Input sensitivity | 2.7mV (MM); 270µV (MC) | – | |
Input impedance | 47kΩ (MM); 300Ω (MC) |
| |
Signal/noise ratio (CCIR) |
| ||
Overload margin | 35dB | – | |
Line and tape inputs: |
|
| |
Nominal sensitivity | 800mV | ||
Input impedance | 22kΩ | 22kΩ | |
Signal/noise ratio (CCIR) | |||
Tone controls, max. boost/cut | ±12dB @ 80Hz and 12kHz | – | |
Power amplifier input |
|
| |
Nominal sensitivity | 800mV | 800mV | |
Input impedance |
| 22kΩ | 22kΩ |
Gain |
| 31dB | 31dB |
Preamplifier output |
|
| |
Nominal output level | 700mV | – | |
Maximum output level | 8V RMS | – | |
Output impedance | <50Ω | – | |
Headphone output |
|
| |
Maximum output level into 600Ω | 8V | – | |
Output impedance | 100Ω | – | |
General |
|
|
|
Mains voltage |
| 230V±12%; 115V±12% | 230V±12%; 115V±12% |
Power consumption (maximum) | 800VA | 800VA (950VA for P35/3) | |
Power consumption (standby) | 2VA | 2VA | |
Dimensions W x D x H (including feet) | 430 x 370 x 110mm | 430 x 350 x 110mm | |
Weight (net) |
| 10.8kg | 9.5kg (10.5kg for P35/3) |
Weight (packed) |
| 13kg | 12.5kg (13.5kg for P35/3) |
Supplied accessories | mains lead | mains lead | |
|
|
| |
|
| 2 x AAA batteries |
|
E&OE
CONTINUAL IMPROVEMENT POLICY
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
NOTE: All specification values are typical unless otherwise stated.
14