CR100 Universal remote control

The CR100 is a ‘universal’ remote that controls the AVR280 and up to

 

Device selection

seven other devices. The instructions on this page only refer to the

IMPORTANT: Press the ‘AMP’ button first to

control of the Arcam AVR280.

operate the AVR280.

For information on using the remote control for other devices, and a

 

full list of its features, see the Handbook supplied with the CR100.

 

English

On/Stand-by

This allows the AVR280 to be put into and taken out of stand-by remotely.

If you do not wish to put Zone 2 into stand-by at the same time as the main zone, press and hold the stand-by button on the remote control for more than 3 seconds.

TAPE

Selects Tape input for the amplifier

Navigation buttons

Arrow buttons allow navigation around the Basic and Advanced Set-up menus on the AVR280.

Confirm a selection by pressing OK.

ShifT B to Power on

Shift C to Power off

Shift E to switch Zone 2 on

Shift D to switch Zone 2 off.

MODE

Cycles through available audio surround modes.

MUTE

Press once to mute the main system. Press again (or use VOL +/–) to un-mute.

VOLUME +/–

Adjusts the sound output.

AVR-specific controls

These buttons are described on the next page.

 

 

 

 

 

 

��

����

�������

���

 

 

 

��

�����

���

���

���

���

��

���

 

 

���

���

���

��

����

 

 

����

 

 

����

 

 

 

 

��

������

��

���

��

���

����

���

����

 

 

 

����

�������

������

�����

����

�����

�����

�����

����

Source selection only

1

DVD input

2

CD player input

3

Television (sound) input

4

Auxiliary (line) input

5

Video Cassette Recorder input

6

Satellite decoder input

7

DAB/FM/AM tuner input

Press the relevant button once to select input.

Source selection and handset configuration

DVD

DVD input/DVD commands

SAT

Satellite decoder input/SAT commands

av

Television (sound) input/AV commands

tun

Radio tuner input/TUN commands

amp

Amplifier. Press first to operate the AVR280

aux

Auxiliary (line) input/AUX commands

vcr

Video Cassette Recorder input/VCR

 

commands

cD

CD player input/CD commands

Press the relevant button once to select input and reconfigure the handset. Press and hold to select the input without reconfiguring the remote.

MENU

Press to select the OSD Main menu.

Press and hold for more than three seconds to select the ‘Set-up Menu Index’.

DISP (Display)

Press to cycle through Off/Dim/Bright illumination of the front panel display

0 /

If the tuner is in Preset mode, these buttons give the next Preset radio station down (0) or up (/). If the tuner is in Tune mode, these buttons decrease/increase the tuning frequency.

NOTE

 

 

Remember to install the four AAA batteries supplied

 

 

 

AVR280

before trying to use your remote control.

 

19

 

 

 

Page 19
Image 19
Arcam AVR280 manual CR100 Universal remote control

AVR280 specifications

The Arcam AVR280 is a high-performance AV receiver designed to deliver an immersive home theater experience. Known for its robust build quality and advanced technological features, it caters to both audiophiles and casual users seeking top-notch sound and video quality.

One of the standout features of the AVR280 is its power output. The receiver is equipped with an impressive 7-channel amplification system, providing 80 watts per channel into 8 ohms. This ample power ensures clear and dynamic audio reproduction, making it ideal for driving demanding speaker systems and creating a rich soundstage. The AVR280 also supports Dolby TrueHD and DTS-HD Master Audio, ensuring superior sound quality for high-definition movie formats.

In terms of connectivity, the AVR280 is well-equipped with multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K video pass-through and upscaling, allowing users to enjoy high-definition content with stunning clarity. The receiver also features ARC (Audio Return Channel) functionality, simplifying sound output from compatible TVs.

The AVR280 utilizes Arcam's proprietary Class G amplification technology, which strikes a balance between efficiency and audio fidelity. This innovative design minimizes distortion, ensuring a clean and detailed sound reproduction across all frequencies. Additionally, the room correction technology integrated into the AVR280 automatically calibrates the audio output based on the acoustics of the room, optimizing performance for different setups.

An intuitive user interface and easy setup process enhance the overall user experience. With a sleek design, the AVR280 seamlessly fits into various home entertainment environments while offering a range of customizable options to suit individual preferences.

For those who prioritize streaming capabilities, the AVR280 is compatible with various streaming services, allowing users to enjoy their favorite music with ease. Overall, the Arcam AVR280 stands out as a versatile and powerful AV receiver, making it an excellent choice for anyone looking to elevate their home theater experience with premium sound and video quality.