Safety guidelines

CAUTION ATTENTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket.

Important safety instructions

This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions:

1. Take heed of warnings and instructions

You should read all the safety and operating instructions before operating this appliance. Retain this handbook for future reference and adhere to all warnings in the handbook or on the appliance.

2. Water and moisture

The presence of electricity near water can be dangerous. Do not use the appliance near water – for example next to a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid filled objects such as vases should not be placed on the equipment.

4. Ventilation

Do not place the equipment on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet, since ventilation may be impeded. The unit should be installed in a well-ventilated area.

5. Heat

Locate the appliance away from naked flames or heat producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat.

6. Climate

The appliance has been designed for use in moderate climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the type described in the operating instructions or as marked on the appliance.

Warning: This is a Class I device and must be earthed.

Warning: The mains plug is used as the disconnect device from the mains supply and shall remain readily operable.

AVR280

10. Power-cord protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, and the point where they exit from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

If the unit has a stand-by function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for a long period of time.

14. Abnormal smell

If an abnormal smell or smoke is detected from the appliance, turn the power off immediately and unplug the unit from the wall outlet. Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that described in this handbook. All other servicing should be referred to qualified service personnel.

16. Damage requiring service

The appliance should be serviced by qualified service personnel when:

A.the power-supply cord or the plug has been damaged, or

B.objects have fallen, or liquid has spilled into the appliance, or

C.the appliance has been exposed to rain, or

D.the appliance does not appear to operate normally or exhibits a marked change in performance, or

E.the appliance has been dropped or the enclosure damaged.

17.Speaker connections

Any speakers must be connected to the AVR280 using Class 2 wire (i.e., no connection to earth should be made). Failure to observe this precaution may cause the unit to be damaged.

Safety compliance

This product has been designed to meet the IEC 60065 international electrical safety standard.

Page 2
Image 2
Arcam AVR280 manual Safety guidelines, Important safety instructions, Safety compliance

AVR280 specifications

The Arcam AVR280 is a high-performance AV receiver designed to deliver an immersive home theater experience. Known for its robust build quality and advanced technological features, it caters to both audiophiles and casual users seeking top-notch sound and video quality.

One of the standout features of the AVR280 is its power output. The receiver is equipped with an impressive 7-channel amplification system, providing 80 watts per channel into 8 ohms. This ample power ensures clear and dynamic audio reproduction, making it ideal for driving demanding speaker systems and creating a rich soundstage. The AVR280 also supports Dolby TrueHD and DTS-HD Master Audio, ensuring superior sound quality for high-definition movie formats.

In terms of connectivity, the AVR280 is well-equipped with multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices. It supports 4K video pass-through and upscaling, allowing users to enjoy high-definition content with stunning clarity. The receiver also features ARC (Audio Return Channel) functionality, simplifying sound output from compatible TVs.

The AVR280 utilizes Arcam's proprietary Class G amplification technology, which strikes a balance between efficiency and audio fidelity. This innovative design minimizes distortion, ensuring a clean and detailed sound reproduction across all frequencies. Additionally, the room correction technology integrated into the AVR280 automatically calibrates the audio output based on the acoustics of the room, optimizing performance for different setups.

An intuitive user interface and easy setup process enhance the overall user experience. With a sleek design, the AVR280 seamlessly fits into various home entertainment environments while offering a range of customizable options to suit individual preferences.

For those who prioritize streaming capabilities, the AVR280 is compatible with various streaming services, allowing users to enjoy their favorite music with ease. Overall, the Arcam AVR280 stands out as a versatile and powerful AV receiver, making it an excellent choice for anyone looking to elevate their home theater experience with premium sound and video quality.