Arcam DV139 CR100 Universal remote control

DV139

E-8

��

�

��

�

��

CR100 Universal remote control

The CR100 remote control is a multi-function unit that controls the

DV139 and up to seven other devices. The instructions on this page

only refer to the control of the Arcam DV139.

For information on using the remote control for other devices, and

a full list of features, see the instruction booklet supplied with the

CR100.

Device selection

IMPORTANT: Press the ‘DVD’ button rst to

operate the DV139.

On/Stand-by

This allows the DV139 to be put into and taken out

of stand-by remotely.

Navigation buttons

Arrow buttons allow navigation around the Basic

and Advanced Set-up menus on the DV139.

Conrm a selection by pressing OK.

SHIFT B to Power on

SHIFT C to Power off

Numeric keys

Gives direct access to individual tracks on audio

CDs.

VOLUME +/–

Adjusts the sound output.

MODE

This button brings up a menu similar to the ‘Audio’

page of the Set-up menu and allows the Dolby

Pro Logic II settings to be changed while a disc

is being played. Cycles through available audio

surround modes.

SHIFT + MODE cycles through HDMI settings.

DISP (display)

Press to cycle through the front panel display’s

brightness options (dim to bright, off).

0 /

Press and release to skip backwards to the

previous track(0) or forwards to the next track

(/).

RPT

Cycles through repeat play options (chapter, title,

disc, etc.).

Press SHIFT + RPT to repeat a specic section of a

DVD or VCD (an ‘A-B repeat’).

Activates the DVD menu if available.

RND

Toggles random (‘shufe’) play of chapters/tracks

on and off.

Source selection and handset conguration

DVD DVD input/DVD controls

SAT Satellite decoder input/SAT controls

AV Television (sound) input/AV controls

TUN Radio tuner input/TUN controls

AMP Arcam amplier

AUx Auxillary (line) input/AUX controls

VCR Video Cassette Recorder input/VCR

controls

CD CD player input/CD controls

Press the relevant button once to select input and

recongure the handset.

Press and hold the button until the power LED

blinks once if you wish to recongure the handset

without changing the input.

Advanced controls

These buttons are described on the next page.

MUTE

Press once to mute an Arcam amplier. Press

again (or use +/– volume) to un-mute.

If the remote control receiver

(located on the right of the front-

panel window) is not ‘visible’ to the

remote control hand-set, then the

remote control will not work! Either

locate the unit differently, or take

advantage of the remote control

input on the rear of the player

(consult your dealer for further

information on this option).

Remember to install

the four AAA batteries

supplied before trying to

use your remote control.