CONNECTINGTO OTHER EQUIPMENT

When connecting to other pieces of equipment, please note the following:

The use of high quality interconnect cables to and from your amplifier is recommended to ensure the best sound quality. Your dealer will be able to recommend interconnect cables that are suitable for your system.

All the line inputs (except for the PHONO input) have the same sensitivity and may be used with equipment other than that labelled, if needed.

The C30 provides the following connections:

TAPE/PROC RECORD OUT 7– Connect these output sockets to the input sockets of your cassette deck (usually labelled RECORD on the cassette deck).

TAPE/PROC PLAY IN 8 – Connect these input sockets to the output sockets of your cassette deck (usually labelled PLAY on the cassette deck). If you do not have a cassette deck you can use this input for other (line level) equipment, such as a CD player, tuner, VCR, etc., (but not for a turntable).

VCR/TAPE2 RECORD OUT 9 – These output sockets can be connected to the input sockets of VCR (usually labelled RECORD on the VCR). Alternatively, these outputs can be connected to a second recording device (such as a second cassette deck).

VCR/TAPE2 PLAY IN bk – Connect these input sockets to the output sockets of your VCR/second recorder (the output sockets are usually labelled PLAY). Alternatively, you can use this input for other (line level) equipment such as a CD player, tuner, etc., (but not a turntable).

DVD bl – Connect this input to the stereo audio outputs of a DVD player.

AV bm – Connect this input to the stereo audio outputs of audio visual equipment such as a laserdisc player, satellite or Nicam tuner.

TUNER bn – Connect this input to the audio outputs of your radio tuner.

CD bo – Connect this input to the audio outputs of your CD player or DAC (digital to analogue converter).

AUX bp – As the C30 has the phono board fitted as standard, the AUX connection is a line level output carrying an equalised phono signal. If desired, this output can be connected to a recording device.

Should you wish to remove the phono board, then the AUX connections can be used as a line input. Please see your dealer for further information about this option, as removing the phono board yourself may invalidate the warranty.

PHONO bq – Connect this input to the audio outputs of your turntable. The phono module supplied with the C30 is compatible with most moving magnet and moving coil cartridges. Set the blue switch immediately below these connections to the correct setting, as follows:

MM– is used for high output moving coil and all moving magnet cartridges. The blue switch is flush with the rear panel of the C30.

MC – is used for low output moving coil cartridges.The blue switch is depressed inside the rear panel of the C30.

Phono earth terminal – For connecting your turntable earth lead (if fitted). Note that this terminal must not be used as a safety earth.

TRIG OUT and REMOTE IN 3 (12V in and out) – These connections are intended for use in multi-room installations.

TRIG OUT – This output provides a 12V signal whenever the unit is switched on (i.e., not off or in standby).This signal can be used to switch on automatically power amplifiers (or other equipment) connected to the C30, as they will come on when the C30 is activated.This is useful if the power amplifier is remote from the C30, or otherwise difficult to access. This feature can be used with both the P35 and the P1. If you are bi-amping with a power amplifier and wish to power both units on or off simultaneously, see page 11.

REMOTE IN – This allows remote control signals to be received by the C30 if the remote sensor is covered (or otherwise not ‘visible’ to the remote control). An external sensor is used to receive the signals from the remote control, which are then fed to the C30 (into this input) using a suitable cable. Remote control signals acceptable to the C30 must be in modulated RC5 format, with a voltage level of between 5V and 15V.

Note that in normal use there is no need to make any connections to these sockets. If you would like to make use of these features, please contact your dealer for more advice on how to make the connections and on what type of cable to use.

English

5

Page 4 Page 6
Page 5
Image 5
Arcam P35 manual Connectingto Other Equipment
Page 4 Page 6

P35 specifications

The Arcam P35 is a high-performance power amplifier that has gained recognition among audiophiles and home theater enthusiasts alike for its exceptional sound quality and robust build. Designed to deliver superior audio performance, the P35 is a testament to Arcam’s commitment to engineering excellence and innovative technology.

One of the standout features of the Arcam P35 is its Class G amplification technology. This unique design offers the efficiency of Class D amplifiers while maintaining the warm, rich sound that Class A amplifiers are known for. By utilizing two sets of output transistors for different power levels, the P35 provides additional power when needed without compromising sound quality at lower volumes. This results in remarkably low distortion levels and an impressive dynamic range, making it suitable for everything from subtle acoustic tracks to explosive movie soundtracks.

The P35 is capable of delivering 120 watts per channel into 8 ohms, and an even more powerful 240 watts per channel into 4 ohms. Such power ensures that it can drive even the most demanding speakers with ease. Moreover, the amplifier features both balanced and unbalanced inputs, providing flexibility for various audio setups. The balanced XLR connections help to minimize noise and signal degradation for a clearer sound, particularly in professional settings.

In terms of build quality, the Arcam P35 boasts a robust chassis that minimizes resonance and vibration. The solid construction not only enhances durability but also contributes to an overall cleaner sound. The component selection is top-notch, utilizing high-quality capacitors and transistors designed to withstand the rigors of constant use while delivering exceptional audio fidelity.

An additional characteristic worth noting is Arcam's emphasis on user-friendly design. The P35 features a straightforward layout, allowing for easy setup and operation. It is also equipped with an LED status indicator that provides visual feedback on the amplifier's operational state.

Overall, the Arcam P35 is a powerful and sophisticated amplifier that excels in delivering an immersive audio experience. With its advanced Class G technology, versatile connectivity options, and exemplary build quality, the P35 stands out as an ideal choice for both stereo and home theater applications. Whether you're a casual listener or a serious audiophile, the Arcam P35 is sure to impress with its musicality and performance. Through meticulous engineering and attention to detail, Arcam has successfully created an amplifier that meets the high expectations of audio enthusiasts around the world.
Top Page Image Contents