Technical specifications
T31 TUNER
FM Section
Tuning range |
| 87.5 to 108.0MHz |
Frequency steps |
| 50kHz |
Presets: total/direct access |
| 30/16 |
Sensitivity (IHF) for 50dB S/N ratio |
| typically 3µV |
Alternate channel selectivity |
| better than 60dB |
Capture ratio |
| 1.5dB |
Frequency response |
| |
Ultimate S/N ratio (CCIR) Mono |
| better than |
Stereo |
| better than |
Total harmonic distortion | (96MHz reference, 22.5kHz deviation at 1kHz) | |
Mono |
| better than 0.1% |
Stereo |
| better than 0.2% |
Channel separation (1kHz) |
| better than 40dB |
Pilot tone suppression |
| better than 60dB |
Output level |
| 700mV at 75kHz deviation |
AM Section |
|
|
Tuning range: |
| 10kHz step; 530 to 1710 kHz |
|
| 9kHz step; 531 to 1602 kHz |
Presets |
| 16 |
Usable sensitivity |
| typically 30µV |
IF rejection |
| > 36dB |
S/N ratio (30% mod., 50mV I/P) |
| > 38dB |
Total harmonic distortion (30% mod., 50mV I/P) | < 3% | |
Output level |
| 300mV at 70% modulation |
Control inputs |
|
|
IR remote standard |
| Philips |
IR in signal level |
| |
Trigger operating voltage |
| |
Trigger in polarity |
| tip positive |
General |
|
|
Output impedance |
| 220Ω |
Minimum recommended load |
| 5kΩ |
Power consumption |
| 10VA |
Size W x D x H |
| 430 x 290 x 85mm |
Weight net |
| 3.8kg |
Weight packed |
| 6.0kg |
Supplied accessories |
| FM dipole aerial |
|
| AM loop aerial |
|
| mains lead |
| ||
E&OE
English
CONTINUAL IMPROVEMENT POLICY | NOTE: All specification values are typical unless otherwise stated. |
Arcam has a policy of continual improvement for its products. This |
|
means that designs and specifications are subject to change without |
|
notice. |
|
9
