Using your tuner
T31 AM/FM RDS TUNER
PRESET
| FM MUTE |
|
SIGNAL | STEREO |
|
TUNED | MHz |
1 – 9 | 2 – 10 | 3 – 11 | 4 – 12 | 5 – 13 | 6 – 14 | 7 – 15 | 8 – 16 |
1 6 7
FRONT PANEL CONTROLS
Preset Memory buttons 1
Directly select up to 32 preset stations (16 AM, 16 FM). Press briefly for stations
BAND 2
Selects FM or AM frequency band.The appropriate letters appear on the display.
RDS 3
Switches between RDS modes on FM if RDS is available. See the section ‘RDS: Radio Data System’.
MONO 4
Selects mono or stereo output. Stereo is only available on FM radio stations. If a weak station is received in stereo the background hiss can be reduced (and in most cases eliminated) by selecting ‘MONO’.
In mono mode, FM muting is suppressed when tuning between stations and the ‘FM MUTE’ indicator is switched off.
STORE 5
The STORE button allows you to assign radio stations to preset numbers. See the instruction ‘Storing a preset’
Preset indicator 6
Indicates the number of the preset currently selected.
Signal strength 7
A
Tuning 8
Switches between Tune and Preset mode for the down/up buttons. Preset mode is indicated by PRESET on the display.
Tune down/up 9
Used to either scroll through presets, or to tune up and down the broadcast band, depending on the current mode. See ‘Tuning to a station’ for more details.
Frequency/ RDS display bk
Indicates the frequency of the selected station in MHz (FM) or kHz (AM); it also displays RDS information when present.
TUNING | BAND | RDS | MONO | STORE | POWER |
8 9 bk 2 3 4 5 bl bm
POWER bl
Switches the mains power to the unit on or off.
Power indicator bm
This glows green to show that the unit is ready for use.The indicator glows red in standby mode when the tuner is switched off via the remote control, or configured in a custom installation.
OPERATION
TheT31 radio tuner can be controlled from the front panel buttons or from the remote control handset (see ‘Using the remote control’).
TUNING TO A STATION
Pressing the TUNING button toggles between the two tuning modes of the unit – ‘Preset’ or ‘Tune’. The selected mode is briefly shown in the display.
PRESET MODE
In Preset mode, press the 5 or 6 buttons on the front panel (or
<or > on the remote control handset) to cycle up and down the preset stations.
See ‘Storing a preset’ and ‘Deleting unused presets’, below.
TUNE MODE
Automatic tuning:
Press the5or 6buttons on the front panel (or < or > on the remote control handset) for longer than one second to engage automatic tuning.The tuner searches for a radio station signal of sufficient strength and stops.To skip to the next station, press one of the buttons again. Automatic tuning is available for both the FM and AM bands.
Manual tuning:
Tap the 5or 6buttons for manual tuning.This can be used for tuning to a specific frequency. It is also useful if you are trying to select a station that is too weak for the auto search mode.
Regardless of the mode used to tune your T31, when it is accurately tuned to a station ‘TUNED’ lights up in the display.
6
