Using the CR-389remote control

Using the CR-389 remote control

FM/DAB

MENU (RDS mode)

Ensure that the FM mode is selected using the FM/DAB toggle button.The FM LED above the FM/ DAB button is lit briefly when FM is selected.

Preset memory buttons

These buttons allow access to individual preset stations.To select a preset press the corresponding keypad button. For

TUNER

FM DAB

DAB MENU DISP

This button scrolls through RDS modes, when available.

DISP (Display)

This button allows you to dim or switch off the tuner display.

STANDBY

This button switches the tuner (and the amplifier if appropriate) between ‘On’ and ‘Standby’.This function does not apply Arcam CD players.

Tune buttons

presets 9–16, press and hold the corresponding preset button for one second. Use the Tune buttons to access FM memory presets 17 to 30.

MODE (Tuning mode)

This button toggles between

PRESET and TUNE modes.

1–9	2–10	3–11	4–12	These buttons enable you to scroll through the stored
				station selections one at a time, or to tune up or down,
5–13	6–14	7–15	8–16	depending on the Tuning mode.

MODE		BAND	BAND
MODE		BAND	This button toggles between FM and AM.
			This button toggles between FM and AM.
	SP1
ENTER	SP2	DISP
ENTER		DISP

SEL

Amplifier controls

These buttons offer basic control over Arcam amplifiers, such as the FMJ A32.

PHONO	AUX	CD	TUNER
AV	DVD	VCR	TAPE

AMPLIFIER

RPT

PROG DISP

CD player controls

These buttons offer basic control over Arcam CD players, such as the FMJ CD23.

CR-389

NOTE: DAB (Digital Audio Broadcast) refers to Arcam DAB tuners such as model DT81.

NOTE: Remember to install the two AAA batteries supplied before trying to use your remote control.

Do not place anything in front of the display area on the tuner (where the IR receiver is located), or the remote control may not work.