Panasonic SC-BTX70 Optional wireless system SH-FX70, Other difficulties with playback, Press OK

Optional wireless system (SH-FX70)		Page
No power.	≥Ensure the AC mains lead of the wireless system is connected properly.	—
The indicator on the wireless	≥Turn the wireless system off and then back on.	—
system does not turn green
even though [I/D SET] is
pressed and pairing completed.
The wireless link indicator	≥There is no link between the main unit and the wireless system. Turn the wireless	—
(e.g. “ [W1] ” or an indicator) is	system off and then back on. Alternatively, turn the wireless system off, disconnect the
flashing.	AC mains lead, and then reconnect it.
The wireless link indicator	≥Check that the main unit is turned on, and the wireless system is turned on.	—
(e.g. “ [W1] ” or an indicator)	≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.	40
does not light.	≥Ensure the surround sound setting on the main unit.	—
The wireless link indicator	≥There is a power supply problem. Consult the dealer.	—
keeps flashing between red and
green.
Network
I can’t connect to the network.	≥Has the LAN cable come unplugged? Check that the LAN cable is properly connected.	11
	≥Have you plugged in a modular cable for use with a telephone into the LAN terminal on	11
	this unit? Connect with a straight LAN cable.	—
	≥Is the power for the modem or broadband router turned on? Turn the power on for each
	device.	31
	≥Is there a mistake in the network settings? Follow any instructions you may have
	received from your ISP (Internet Service Provider) and make changes to the settings.	—
	≥Are the broadband router settings correct? Read the operating instructions for the
	broadband router.	—
	≥Is the broadband router and/or modem correctly connected? Check the operating
	instructions for each device and connect accordingly.	31, 35
	≥Check the “Network Settings” and “BD-Live Internet Access” settings.
While using my PC, I cannot	≥Does your Internet Service Provider (ISP) or service contract prevent multiple	—
connect to the network.	terminals connecting at the same time? Check the content of your contract.
VIERA CAST does not operate	≥Is the network connection correct?	11
or connect.	≥Image of the video contents may be incomplete or may not display depending on how	—
	busy the environment or the connected line is.
Other difficulties with playback
The disc side sliding door will	≥Make sure that the iPod docking switch lever has clicked into it’s original position.	28
not open.
Audio and video momentarily	≥This occurs between playlist chapters or scenes ([AVCHD]).	—
pause.	≥When playing a title recorded on both layers, the unit automatically switches between	—
	layers and plays the title in the same way as a normal program. However, video and
	audio may momentarily cut out when the unit is switching layers.
BD-Video or DVD-Video is not	≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number,	Cover
played.	and is not defective.	35
	≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting.
	≥Some BD-Video can only be output with HDMI.	—
Picture-in-picture is not played	≥Confirm whether the disc supports picture-in-picture.	—
with BD-Video.
The BD-Live is not played with	≥Confirm whether the disc supports the BD-Live.	—
BD-Video.	≥The inserted SD card does not have sufficient available capacity.	—
	≥The SD card is write-protected.	43
	≥Sub contents copied to an SD card are provided by the disc producer as a part of the	19
	BD-Video content. Even if you record images and audio onto an SD card, it cannot be
	played as a BD-Live.
Alternative soundtrack and	≥The languages are not recorded on the disc.	—
subtitles cannot be selected.	≥You may not be able to use the on-screen menu to change the soundtrack and	16
	subtitles on some discs. Use the disc’s menus to make changes.
No subtitles.	≥Subtitles are not recorded on the disc.	—
	≥Turn the subtitles on. Set “Subtitle” on the on-screen menu to “On”.	33
Angle cannot be changed.	≥Angles can only be changed during scenes where different angles are recorded.	—
The resume play function does	≥Memorized positions are cancelled when	—
not work.	– pressing [∫STOP] several times.
	– opening the sliding door.	—
	≥The resume play function may not work depending on the disc.
	≥[BD-V]: On BD-Video discs including BD-J, the resume play function does not work.	52

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.

1	Press [BD/SD] to select “BD/DVD”.			When the following indicator
		Remote Control
2	While stopped, press [SETUP].	Set Code 1		appears on the unit’s display and
3	Press [3, 4] to select “General” and press [OK].	Set Code 2	NOTE	you are unable to operate the unit
4	Press [3, 4] to select “Remote Control” and press			e.g., Display
	[OK].	Press [] and [OK] together
5	Press [3, 4] to select the code (1 or 2) and press	for more than 5 seconds on
		the remote.
	[OK].
				The unit’s remote control code
6	To change the code on the remote control
	While pressing [OK], press and hold the numbered button ([1] or [2])			Press and hold [OK] and the
	for more than 5 seconds.			indicated number button at the
7	Press [OK].			same time for more than 5 seconds.

Reference

RQT9464

49