Panasonic SC-BTX70 Speaker installation option, Making the wireless link, Attaching to a wall

Models: SC-BTX70

1 56
Download 56 pages 13.23 Kb
Page 41
Image 41
Making the wireless link

Making the wireless link

1Turn on the wireless system.

Unit on/off button [C I, B Í]

Use this button to turn the unit on and off.

C I: The unit is on.

B Í: The unit is off.

3Turn on the additional wireless system.

4While pressing [5/9] on the main unit, press the numbered button [3] on the remote control until “P” lights in the main unit’s display.

WIRELESS LINK

WIRELESS LINK indicator

Red: The unit is on and the wireless link is deactivated.

Green: The unit is on and the wireless link is activated.

5While “P” is displayed, press [I/D SET] on the rear of the additional wireless system.

≥The indicator on the additional system turns green.

≥If “P” goes off before you press [I/D SET], repeat step 4 and then continue the procedure.



Use a pointed object.

2Turn on the main unit.

The wireless link indicator on the main unit will be turned on.

e.g.

 

 

≥If the indicator is flashing, refer to the

SLP STCT DDTS PL

SRDE. PRG

“Optional wireless system (SH-FX70)”

PGMRNDRDS

in the Troubleshooting guide. (> 49)

EQ W1W2 WS

For 4.1 ch settings, go to step 8.

6While pressing [5/9] on the main unit, press the numbered button [3] on the remote control.

7Turn off and on the additional wireless system.

≥Make sure the indicator on the additional wireless system lights up green.

8Start the EASY SETUP to configure the speaker settings. (> 12)

≥After changing the speaker settings start play on the main unit.

≥The main unit will not regcognise the additionally added speakers unless the speaker settings have been re-configured in the EASY SETUP. (> 12)

–Be sure to re-configure the system each time speakers are added or removed.

NOTE ≥If you should change the digital transmitter, repeat the pairing steps of the wireless system.

If 2 wireless system units are used, repeat the pairing steps for each unit, 1 at a time. ≥You cannot use the wireless system with SH-FX65T or SH-FX67T digital transmitter.

Speaker installation option

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

1 Drive a screw (not included) into the wall.

e.g., Front speakers

 

At least 30 mm

DO

4.0 mm

 

NOT

7.5 mm to 9.4 mm

 

 

 

Wall or pillar

3 mm to 5 mm

 

2 Fit the speaker securely onto the screw(s) with the hole(s).

DO

In this position, the speaker will likely fall if moved to the left or right.

Move the speaker so that the screw is in this position.

Preventing the speakers from falling

≥You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

e.g.

String (not included)

Thread from the wall to the speaker and tie tightly.

 

 

 

 

 

Approx.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screw eye

 

 

 

150 mm

Wall

(not included)

 

Speaker installation optionAttaching to a wallPreventing the speakers from falling Rear of the speaker

RQT9464

41

Page 41
Image 41
Panasonic SC-BTX70 manual Speaker installation option, Making the wireless link, Attaching to a wall