Basic operation
Instructions for operations are generally described using the remote control in these operating instructions.
Preparation
Turn on the television and select the appropriate video input on the television.
Playback
Inserting or removing a USB device
1)Push $ to open the SD card/USB door.
2)Insert the USB device into the USB port.
To remove the USB device, complete all USB
≥Before inserting any USB device to this unit, ensure that the data stored therein has been backed up.
≥Check the orientation of the USB connector and insert it straight in.
≥Some USB devices inserted into this unit may cause this unit to stop operating. Such USB devices cannot be used on this unit.
About the use of USB device
Since the physical size of USB device can vary, please consider its width when connecting any USB device to this unit.
≥If the USB device does not fit, we recommend using a USB extension cable (not included) ≥When connecting a USB device using a USB extention cable make sure not to tangle
the cable round the SD card/USB door. The SD card/USB door may get damaged.
Stop | Pause |
BD/SD, iPod | Play |
Inserting or removing an SD card
1)Push $ to open the SD card/USB door.
2)Insert the SD card into the SD card slot.
Insert the card with the
≥Press on the centre of the card until it clicks into place.
To remove the card, press on the centre of the card and pull it straight out.
RADIO/EXT IN
Inserting or removing a disc
1) Press [DISC < OPEN/CLOSE] to open the sliding door.
2) Place the disc onto the spindle in the centre and then push the disc down until it clicks into place.
≥When inserting or removing a disc, tilt the disc so as not to
touch the sliding door. | Label facing up |
|
≥Press [DISC < OPEN/CLOSE] again to close the sliding door.
≥To remove the disc, while pressing down on the spindle, grasp the edge of the disc and gently lift it out.
≥Insert
Headphones (not included) Headphone plug type: ‰3.5 mm stereo mini plug
≥Reduce the volume before connecting. ≥Audio is automatically switched to 2ch
stereo.
≥To prevent hearing damage, avoid listening for prolonged periods of time. Excessive sound pressure from earphones and headphones can cause hearing loss.
RQT9464
16
1 | Press [Í] to turn on the unit. | ≥If the media with data in different file formats is inserted, the file | |
2 | Insert the media (D above). | selection menu is displayed. Press [3, 4] to select the desired | |
| Play starts. | file format and press [OK]. | |
| ≥If the menu is displayed, press [3, 4, 2, 1] to select the item | ||
≥If play does not start, press [1PLAY]. | |||
and press [OK]. | |||
≥When [1PLAY] is pressed with the sliding door open to either | ≥If the screen prompting you to use the colour buttons appears, | ||
side, the sliding door will close. If a disc is inserted, playback will | continue to operate with the colour buttons on the remote control. | ||
start. |
|
≥Disc playback will stop and the sliding door will open if [iPod < OPEN/CLOSE] is pressed twice during disc playback.
– The resume play function may operate with some discs.
NOTE | ≥Be sure to press [DISC < OPEN/CLOSE] to open and close the sliding door. Forcing the sliding door open or close, will |
damage the unit. | |
| ≥Keep your fingers away from the sliding door when it is moving to avoid minor injuries. |
≥Signal from PAL discs is output as PAL. Signal from NTSC discs is output as “NTSC” or “PAL60”. You can select “NTSC” or “PAL60” in “NTSC Contents Output” for NTSC discs. (> 35)
≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you finish to preserve the unit’s motor and your television screen.
≥If a media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.
≥The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.
≥When playing a set of two or more
| To display menus |
| |
TIPS | Press [TOP MENU/DIRECT NAVIGATOR]. |
|
To show
The
1)Press
2)Press [3, 4, 2, 1] to select the item and press [OK].
≥It may take time to read