Panasonic SC-BTX70 manual Wireless connections optional, Connections

Wireless connections (optional)

By connecting 1 or 2 units of the optional Panasonic wireless system SH-FX70 with 2 or 4 optional Panasonic speakers SB-HSX70, it is possible to change this unit into a 4.1 ch or 6.1 ch home theatre system.

This system's surround sound effect settings will change (> 15) and it is possible to listen to the true, original surround audio signals of the playback contents. (However, the centre channel included in the audio source will be output from the front L R speakers.)

Connecting the surround, surround back speakers (SB-HSX70) and the optional wireless system (SH-FX70)

∫Wireless setup diagram e.g., 4.1ch

Main unit (with the digital transmitter)

Preparation

SH-FX70: 1 unit		Seating position
SB-HSX70: 1 set	LS		RS
	Surround speaker cables

LS: Surround (left), RS: Surround (right)

≥Place behind the seating position, about 1 m higher than ear level.

e.g., 6.1ch

Main unit

(with the digitalPreparation transmitter)

SH-FX70: 2 units

Seating position

LS			RS	SB-HSX70: 2 sets
	LB	RB

Surround speaker cables

LS: Surround (left), RS: Surround (right) ≥Place on the side of the seating position.

LB: Surround back (left), RB: Surround back (right)

≥Place behind the seating position, about 1 m higher than ear level.

	≥Turn off all equipment before connection and read the appropriate operating instructions.
	≥Connect the AC mains lead after all other connections are complete.
NOTE	≥Do not use the wireless system and digital transmitter in a metal cabinet or bookshelf.
	≥Place the wireless system within approximately 15 m from the home theatre unit.

Optional speaker settings

RQT9464

Connections

∫Digital transmitter

Do not insert or remove while the home theatre unit is on.

SH-TR70 digital transmitter	1 Push $ to open the digital transmitter door.
	2 Insert fully until you hear a click.

Push!

∫Wireless system

	LS / RB LB / RS		Connecting the speakers to the wireless system
	SPEAKERS
	ENCEINTES		Connect to terminals of the same colour.
			AC IN
SURR		I/D SET
L R	SURROUND (3 – 6	)		For 4.1ch connection
SIDE SIDE AMBIOPHONIQUES
			Speaker cable	SURROUND (LS): Blue	Selector setting for	SURR
				SURROUND (RS): Grey	the left and right
					speakers
SURR				For 6.1ch connection
			Insert fully.		Selector setting for
				SURROUND (LS): Blue
L	R		Impedance: 3 ≠ to 6 ≠	SURROUND BACK (LB): Grey	the left speakers	L
SIDE	SIDE			SURROUND (RS): Grey		SIDE
Surround			Speaker input power: 100 W		Selector setting for
selector			(Min)	SURROUND BACK (RB): Blue	the right speakers	R
						SIDE

∫AC mains lead

AC mains lead

To household mains socket

40