Argosy Research H200 Series, H200HF Series manual

The H200 / H200HF is powerful, easy to use and packed with benefits

•Solid state microprocessor can control from one to four units allowing you system add on capabilities as your needs grow.

•Regeneration may be initiated with a time clock, meter delayed or meter immediate.

•Up to nine fully programmable cycle times, that can be moved around and repeated in various orders for your particular application needs.

•Soft water brine refill reduces build up in brine tank from hardness and iron present in the raw water supply.

•Easy to use user screen shows Time of Day, Current Flow Rate, Total Gallons Processed and Volume/Days until Regeneration.

•Solid state microprocessor has a removable POD display allowing you to remote mount the POD on top-mounted systems for easy access.

•Economical built-in electronic meter on H200 Series requires no extra piping.

•Economical remote mount electronic meters are available in a wide variety of sizes for the

H200HF Series.

•Both two-inch FPT and 2.5” Victaulic Inlet/

Outlet are standard on the H200 Series.

•Lead free brass body with NSF Approved Food Grade Electro-Deposited Epoxy Coating to pro- tect internally and externally against corrosion.

•Corrosion free Noryl® backplate.

•Nema 3 Enclosure

•Optional Calendar Day Override from 1-28 days.

•24-Volt output AC adapter is safe, comes with a 15-foot cord for easy installation.

•Reliable and proven DC drive from our family of H-Series Systems.

•Capacitor back-up with up to 24-hour power carry over.

•Optional System Control Board enables the addition of a third and fourth unit to be imple- mented into the system design. In addition the system board can be utilized to operate external devices like chemical feed pumps, booster pumps, and to lock out an R.O. sys- tem. The available two sets of normally open

&normally closed auxiliary outputs can be activated after the start of a regeneration, after the start of a specified regeneration cycle, on a set number of gallons during service, on a set number of gallons during service, on a set number of gallons during service & regenera- tion mode, while in standyby & regeneration mode with a multi-tank system, or if a unit would be in an Error Mode.

•Motorized Alternating Valve "MAV" Provides:

•Twin Alternating for H200 Top or Side Mount Systems.

•Provides for no Raw Water By-Pass during regeneration for H200 Top or Side Mount Systems.

•Provides choices of treated or non- treated water for regeneration.

•Separate source regeneration.

Removable POD Display	2" Motorized Alternating Valve "MAV"
	Requires System Board For Operation 3