Argosy Research H200HF Series, H200 Series manual All Diagnostic History screens are resettable

H200/H200HF Diagnostic and History Screens provide the water treatment operator with a wealth of information.

Diagnostic Screens

Accessed by pressing UP and DOWN

simultaneously for >3 seconds.

DIAGNOSTIC 1

DIAGNOSTIC 2

DIAGNOSTIC 3

Returns to normal operation after 5 minutes.

Diagnostic Screens

	•	DaysAll Diagnosticsince lastHistoryregenerationscreens are resettable
		with the History Reset sequence while in the
	• Total volume treated since last regeneration
		Diagnostics1 screen. Holding the Set Clock
	• Reserve history for the current day and
		and Regen buttons for > 3 seconds initiates a
DIAGNOSTICS 1		previous six-days
	•	totalizer or history reset.
Days since the last regeneration.		Usage history by the hour for each of the
		last 63 days
	• Maximum flow rate and hour it occurred
	• Maximum flow rate per unit by hour and
		day it occurred
	• Total volume through the unit since it was
		installed

DIAGNOSTICS 2		All Diagnostic History screens are resettable
Gallons or Liters x1000 since the last		with the History Reset sequence while in the
regeneration.
		Diagnostics1 screen. Holding the Set Clock
		and Regen buttons for >3 seconds initiates a
		totalizer or history reset.
DIAGNOSTICS 3
Reserve history. This screen only appears if valve
is set to calculate Reserve in System Setup 7.		Reserve Value
Use arrows to select a day.
0	= Today
1	= Yesterday
6	= 6 days ago (max.)

Automatically Toggles

REGEN will display if a regeneration occurred that day.

	DIAGNOSTICS 4
DIAGNOSTIC 4	History of volume used.
	Use arrows to select a day.
	0	= Today
	1	= Yesterday

63 = 63 days ago (max.)

Automatically Toggles

Simultaneously press

UP and DOWN.

Gallons Used

DIAGNOSTIC 4-B	DIAGNOSTICS 4-B
	Hourly history of volume use. Use
	the UP and DOWN arrow to select
	the hours of the day from screen 4.
	Automatically Toggles
Diagnostic 4

Volume used within the selected hour

continuned on Page 21

4