Using the AV Playback Function
Activating the Mobile Video HDD for AV Playback
1. Turn on your TV and AV receiver, and switch to the correct input channel.
2. Make sure the Mobile Video HDD is turned on (blue LED lights up) and press (STANDBY)
button to activate this unit. If this unit is not turned on, press the Power button to turn it on.
3. Now you can use the remote to operate this unit for playback.
4. After playback, press to go back to standby mode; you don’t need to power off it.
5. If you want to move the Mobile Video HDD, turn off this unit b y pressing the Pow er button
until both LEDs are off, and then remove all connections.
y When using the remote, point the remote at this unit’s Remote receiver.
y When using the remote, the inhibit icon will appear on screen when you
press a button whose function is not available.
y If the setting of the video output is incorrect, the TV screen will not display normally.
Switch to correct setting by pressing and holding and then press MENU.
Selecting the Media Files for Playback
After activating this unit, all folders and media files will be listed on the screen as the figure
shown below. This screen is called “File NAVI”.
Folder name
Selected
folder or file
Item number
The top level of the disk is the “ROOT” folder. You can save files under the Root
folder or any folders within this folder. It is recommended that you manage your files
with folders instead of save all files in one folder. For example, you should create a
folder b y forma t (for examp le, “D VD-Mov ies”) , and t hen cre ate an other folder withi n
the “DVD-Movies” folder by the movie’s name (for example, “Movie-01”), then save
the files into the “Movie-01” folder.
7