•Erasing the last photo of low resolution will toggle frame counter to go up by 1
Connecting camera to PC
Installing Arcsoft programs and camera drivers in Windows 98SE/Me
NOTE: The graphics shown are based on the user interface in Windows 98SE
1.Put the program CD into the
2.Select your desired language
3.Change Destination Folder if necessary
4.Select components to install
5.Change program folder name if necessary
6.Check the checkbox to start camera drivers installation
Installing camera drivers ......
7.When installation of My DSC is complete, restart your computer
8.After your computer is restarted, connect the camera and computer with the USB cable and the computer will recognize the camera.
Note: The installed camera drivers may conflict other USB devices in your computer system.
Installing Arcsoft programs and camera drivers in Windows 2000/XP
NOTE: The graphics shown are based on the user interface in Windows XP
1.Put the program CD into the
2.Select your desired language
3.Change Destination Folder if necessary
4.Select components to install
9
