MOWER SET-UP

CAUTION: DO NOT operate mower unless either side discharge cover or side discharge deflector is installed. Thrown objects may cause damage or injury. Never operate unit with rear door open unless grass bag is in place.

CAUTION: If clog or obstruction prevents grass flow, release engine/blade control and disconnect spark plug wire before attempting to clear away any clogs.

To Bag (Optional on Push Models)

CAUTION: Check grass bag frequently for wear or deterioration. Replace worn or damaged bag with Ariens original equipment replacement bag only.

See Figure 11 on page 14.

1.Shut off unit.

2.Make sure mulch cover is closed and secured with knob.

3.Lift rear door and remove mulch plug, if necessary.

4.Seat bagger chute inside deck opening and on top of deck.

5.Hook grass bag frame on mounting pins.

6.Lower rear door.

There should be no openings between bagger chute and mounting surface after installing bag. If necessary, clear debris from bag mounting surfaces.

Grass Bag Removal

1.Shut off unit.

2.Lift rear door.

3.Use handle to lift bag off mounting pins.

4.Close rear door.

NOTE: Empty grass bag and clean mower pan after each use. DO NOT allow grass clumps or a grass coating to collect inside of grass bag or mower pan. Remove grass bag from mower, wash bag with hose and allow to dry.

1

3 2

4

1.

Rear Door

3.

Mounting Pin

2.

Bagger Chute

4.

Grass Bag

 

 

 

Frame

Figure 11

To Side Discharge

See Figure 12 on page 15.

1.Shut off unit.

2.Remove grass bag.

3.Lift rear door and install mulch plug (see below).

4.Remove the knob from and then hold open the mulch cover.

5.Install the side discharge chute on stud on the mower. Make sure chute covers discharge opening.

6.Secure the chute with the knob removed in step 4 and then close the mulch cover.

GB - 14