Ariens 911110 - P 21LM, 911112 - DSP 21LM, 911111 - SP 21LM, 911113 - DESP21LM Rear, Front, OPTIONAL CONTROLS, Standard Models, Primer Bulb (911110, 111), Cutting Height Settings Chart, Wheel Drive Control (self-propelledmodels)

Cutting Height Settings Chart

Notch Cut grass length

11" (25 mm)

21-1/4" (32 mm)

31-1/2" (38 mm)

42-1/4" (57 mm)

52-3/4" (70 mm)

63-1/2" (89 mm)

74" (102 mm)

Standard Models

To change cutting height, move cutting height levers one notch at a time on each wheel to set desired height (Figure 7).

NOTE: Each wheel on mower must be set at the same height for a level cut.

Rear

1

Low High

	1
Low	Low	High High

Front

1.Cutting Height Lever

Figure 7

OPTIONAL CONTROLS

Primer Bulb (911110, 111)

Push the primer bulb in to add fuel for easier engine start.

Wheel Drive Control (self-propelled models)

CAUTION: Unit will move forward at engine start if wheel drive control is engaged. ALWAYS release wheel drive control before starting unit.

NOTE: Engine must be running for wheel drive to propel unit.

911111

To drive forward:

Slowly squeeze the wheel drive control toward the handlebar until you reach a comfortable ground speed. Hold the wheel drive control against the handlebar for full speed.

To stop:

Release wheel drive control.

STOPGO

GO

Figure 8

OM1245

GB - 12