Speed Control (self-propelled models)

Speed control rod changes the mower’s forward travel speeds.

Fast – Push rod all the way forward.

Slow – Pull rod all the way rearward.

Figure 7

Start mowing slowly and use speed control rod to gradually increase speed to a safe, comfortable walking pace.

Speed control rod should hold the desired speed. If not, adjust speed control bell crank. (See SPEED CONTROL BELL CRANK on page 23.)

Wheel Drive Control (self-propelled models)

CAUTION: Unit will move forward at engine start if wheel drive control is engaged. ALWAYS release wheel drive control before starting unit.

NOTE: Engine must be running for wheel drive to propel unit.

To drive forward:

Slowly squeeze and hold wheel drive control against handlebar.

To stop:

Release wheel drive control.

OM1240

STOPGO

Swivel Wheel Lock (911194)

CAUTION: Avoid loss of control. Lock swivel wheels when mowing on a slope or hill. Do not mow on steep slopes.

To hold wheel straight:

1.Push swivel wheel lock forward.

2.Push unit forward until wheel locks in place.

To allow wheel to swivel:

1. Pull swivel wheel lock back.

GB - 13