![](/images/backgrounds/98158/98158-3112x1.png)
1
2
3
OE00044
Operate ignition switch with a removable key. Ignition switch has four positions: Stop (1), Headlight (2), Run (3), Start (4). See STARTING AND SHUTTING OFF ENGINE on page 14 for detailed instructions on how to start engine.
Engages (2) and
1disengages (1) mower blades.
2
OE005
FuelChoke (1) – Use to start a cold
1 engine.
2 | Fast (2) – Increases engine |
| speed. |
3 1
OFF | LEFT |
| TANK |
RIGHT
TANK
2
OF1881
Controls fuel flow from left fuel tank (1) or right fuel tank (2).
Open the valve to operate the engine. Turn the valve to off (3) when storing or transporting the unit.
3 Slow (3) – Decreases engine
OE0002 speed.
Throttle Lever (915055, 057, 059, 501)Fast (1) – Increases engine
1 speed.
2 Slow (2) – Decreases engine
OE0043 speed.
Choke Control (915055, 057, 059, 501)Use to start a cold engine. Pull choke control out to choke engine. Push choke control in when engine is warm.
OE0058
Parking BrakeEngages (2) and
1 disengages (1) parking brake.
2
OE0049
Records total number of hours engine has been run.
NOTE: Hour meter will continue to run if ignition key is left in the run position with the engine turned off.
OF1881
Steering Levers•Reverse (1) – Pull both steering levers backward.
•Forward (2) – Push both steering levers forward.
•Left (3) – Pull left steering lever back or push right steering lever forward or a combination of both.
•Right (4) – Pull right steering lever back or push left steering lever forward or a combination of both.
1 | 2 |
3 | 4 |
| 07757600B |
0E0030
NOTE: To stop, return both steering levers to neutral.
NOTE: The steering levers must be in the neutral position to start the engine.
NOTE: The parking brake must be disengaged prior to moving the steering levers from the neutral position.
GB - 12